How To Make Your Car Exhaust Spit Flames?

If you’re looking to add a little life to your car, but don’t want to do anything that’s too crazy or expensive, check out this tutorial on how to make your car exhaust spit flames. This idea is fun and easy for anyone looking for an inexpensive way to make their car stand out from the rest. It requires only basic materials and tools, with no modifications to your engine required!

Suppose you’re looking for a way to make necks turn while at auto shows. Also, you have presumably formerly considered making dears shoot out of your Exhaust. Chances are you do not have a Lamborghini Aventador that does this stock, so

How To Make Your Car Exhaust Spit Flames?

The leading cause of flames shooting out of the exhaust is unburnt fuel that has made its way into the exhaust and ignites due to the hot temperature of the exhaust while revving hard. This could also mean that your engine is running very rich, which means more fuel is being dumped into the combustion chamber than required. This excess fuel is unused and hence ignites in the exhaust and causes flames. In the case of high-end sports cars, a small amount of fuel is sprayed into the exhaust to create a crackle and noise, which can also be causing flame.

Keep many effects in mind. For starters, you will have to modify your vehicle in order to produce dears. It can also be relatively dangerous. Incipiently, it may not indeed be legal in your state. Having said the over, the primary way this is fulfilled is by causing unburnt energy to catch fire. In this composition, we look at some of the ways you can make this be.

What Are The Ways to Make Your Vehicle Shoot Flames:

Here are the five major ways that you need to work on how to make your car exhaust spit flames.

1. Flame-Throwing Exhaust:

This system is the easiest way for you to get this effect. Honey-throwing accoutrements aren’t veritably precious, and for the utmost part, they do the job. Also, since this way requires the most negligible quantum of work, it might be the safest. Still, if you prefer a DIY design, you can try a cheaper system and do it yourself.

One of the most popular brands for flamethrower exhausts his Hot Licks. You can learn further about the tackle by clicking then. This is the best method of how to make your car exhaust spit flames.

2. Use An Aged Auto:

Believe it or not, you can beget an aged auto to boomerang without significant trouble. Ultramodern buses have systems to help them from passing, but you can generate utmost buses from the eighties to boomerang. Before doing so, make sure that everything is in perfect working order. Most significantly, there should be no drips or leaks that might beget an accidental fire.

The first step is to turn your machine on and give it some gas. Also, you can turn the engine off, but don’t take your bottom off of the pedal, maintain light pressure instead. Give it many moments and start the auto again. Once the machine is running, bottom the accelerator. This should beget dears to shoot out of your Exhaust.

This system isn’t practical, but it’s a way for dears to come out of your Exhaust.

3. Place A Spark Plug In The Exhaust:

This system is a straightforward and crude way of making your auto spear dears, but it works. Connect a spark draw about five elevations from the end of the Exhaust, run the wiring to the motorist, and set up a switch to enkindle the spark. On the other end, the line from the controller should connect to the positive outstation of your auto battery. This system offers much fun, but don’t overdo it. The dears can be relatively large and, therefore, dangerous.

4. Antilag:

The Antilag system is a fairly common way to reduce turbo pause. It works by burning energy after the machine, but still before it gets to the turbo. This system will keep the turbo in action indeed when there aren’t enough exhaust feasts. Still, a notable side effect is that it can produce emotional dears.

5. ECU Programming:

This system requires a lot of knowledge and outfit. It includes remapping the programming of your machine control unit (ECU). Still, the skill position necessary for this revision means it isn’t doable for noobies. You can always take your auto to a tuning specialist and ask for a “Pop & Bang” ECU remap.

In substance, the idea behind this reprogramming is to make your auto keep the energy going with an open throttle. That means that point will go through the machine and out into the Exhaust as unburnt energy. The heat of the Exhaust can light the power performing in dears.

The use?

This is only useful to make people notice and be amazed by how the auto is shooting flames. However, make sure to use it in areas where no bone differently will get hurt, If you get it installed.

Is it legal?

Not. Modifying any part of the Exhaust on the auto isn’t reasonably allowed since it’ll affect the auto’s performance and the emigrations and energy consumption. So, honey fliers are illegal, and if you get one installed in your automobile, you’ve just been advised of the consequences.


No matter which of these styles you go with, remember to be safe at all times. Tuning your automobile like this can be dangerous, and it might beget injury or material damage. Make sure to understand how each part operates and avoid any gratuitous pitfalls. For illustration, make certain observers are at least 30 bases down, especially during the testing phases. And, remember, don’t overdo it. These dears can be hot, and any leakage might lead to severe damage. I hope you got the idea of how to make your car exhaust spit flames. Drive Carefully!

Leave a Comment