Does this happen with you as you started your car and heard a “ding” noise? Observing two warning lights on the display. That being the abs, and electronic stability control lights came on. Don’t worry the article discusses dodge charger speed sensor problems. So, read until the end. Hope you will enjoy reading the article.
What Is A Speed Sensor?
It is located on the transmission case, within the rear differential assembly or inside the ABS the vehicle speed sensor reads the speed of the wheel rotation on a vehicle while driving. The sensor also helps the vehicle maintain stability while driving by telling the computer when to release pressure to a wheel while using the ABS.
A type of tachometer, this part consists of a toothed ring and pickup. The speed sensor reads the rotational speed of the reluctor wheel, located within the transmission. Speed sensors use a trigger wheel mounted in conjunction with the ring gear to accomplish the same tasks like those performed by the transmission-mounted version.
Common Dodge Charger Speed Sensor Problems? 
1. Premature Engine Failure
The most common problem in the Dodge Charger models that have to be avoided is the Premature engine failure. These vehicles are built to have much power, but this doesn’t explain or excuse the premature engine failures. 
Unfortunately, most of the time, the problem isn’t as simple as replacing a gasket, as often Dodge Charger engines need to be replaced or rebuilt once they start having problems.
That means that your Charger might need to be replaced more quickly than other vehicles.
2. Sticky Gear Shift
One of the most frustrating, but not necessarily concerning, problems are with the gear shifter. The problem doesn’t seem to originate with the transmission and has more to do with the shifter design as an accessory.
Specifically, the Dodge Charger gear shift tends to get stuck in the ark. The problem can usually resolve itself if you stick with it, it can take a few minutes to get the shifter back to working as normal.
3. Premature Wear And Tear On Suspension System
Various problems go into the suspension system wearing out early on some Dodge Charger years to avoid. Tie rods and stabilizer pins wearing out prematurely are the most common problems, but there are also problems with the front ball joints and front inner tie rods.
Suspension issues are expensive to fix, especially when the parts themselves don’t last as long as they should. This is a problem that can decrease the life of your vehicle and make it a more expensive car to keep.
How Do Mechanics Adjust Or Repair Incorrect Idle Speed?
The repair procedure depends on the exact cause of the high idle. The above-mentioned parts involved would be inspected, removed for repairs, and/or replaced as needed.
Faulty Fuse In the majority of vehicles, engine idle speed is controlled via an idle control valve (ICV). A faulty or blown fuse in other electronically controlled systems can cause the Idle Air Control (IAC) motor to malfunction, leading to a higher than normal engine idle speed.
1. Faulty Idle Air Control Valve (ICV)
In order to maintain idle speed, some cars are equipped with an idle air control valve. This part can malfunction due to excessive carbon buildup in the intake manifold.
2. Vacuum Leak
A vacuum leak can cause a high engine idle as the oxygen sensor detects lean operation and then the engine computer tries to compensate, which can result in an abnormal idle.
3. Malfunctioning Throttle
A malfunctioning throttle system can cause both a high or low idle as well as an engine stall. A dirty air intake or cracked air intake tube is often the culprit.
4. Computer Malfunction
The idle speed may be affected if the powertrain module is not working correctly.
Cost Of A Speed Sensor Replacement?
On average, the cost for a Dodge Charger Speed Sensor Replacement is $132 with $37 for parts and $95 for labour Prices may vary depending on your location.
Conclusion
The above article discusses dodge charger speed sensor problems. Hope the information was useful. If you have any queries with the mentioned information then please feel free to comment below we will get back to you as soon as possible.
Cheers!